C90810

ALLOY SEARCH MODULE

GET STARTED
SEARCH CLEAR

SPECIFICATION CROSS-REFERENCE CHART

Cast

Tin bronze alloys, such as C90810, are typically found in gear, high-strength bushing 天天斗牛bearing applications where low speeds 天天斗牛heavy loads are present. Other high-strength applications for these alloys include pump impellers, piston rings, steam fittings 天天斗牛valve bodies. C90810 tin bronze castings are utilized in movable bridge components, turntables for bridges 天天斗牛other structures for fixed 天天斗牛expansion bearings with slow or intermittent movement with heavy loads.

Info

Product Description: High Tin Bronze
Solids: 1" to 6" O.D.
Tubes: 1" to 6" O.D.
Rectangles: Up to 10"
Standard Lengths: 144"
Shape/Form: semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar
Compliance: C90810 is compliant with key legislation including (1) Federal Safe Drinking Water Act 1974 - SDWA, (2) Federal Reduction of Lead in Drinking Water Act 2011 天天斗牛(3) California AB1953

Typical Uses

Industrial: bearings, gears, shafts, worm gears

Chemical Composition

Cu%1 Pb% Sn% Zn% Fe% P%2 Ni%3 Al% S% Sb% Si%
Chemical Composition provided by CDA

1In determining Cu min., Cu may be calculated as Cu + Ni.  2For continuous castings, P shall be 1.5%, max.  3Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.4% min. Single values represent maximums.
 
Rem.
 
0.25
11.00-
13.00
 
0.30
 
0.15
0.15-
0.80
 
0.50
 
0.005
 
0.05
 
0.20
 
0.005

Machinability

Copper Alloy UNS No. Machinability Rating Density (lb/in3 at 68 °F)
C90810 20 0.323

Mechanical Properties

Tensile Strength, min Yield Strength, at .5% Extension Under Load, min Elongation, in 2 in. or 50 mm min Brinell Hardness (500 Kg load) Remarks
ksi MPa ksi MPa % typical BHN  
          95

FIND A PRODUCT

SEARCH BY
CDA NUMBER
ӣ酷乐棋牌  IJַ    手机博彩  叫我棋牌